The most
economical of all the neck id badge holder printing methods
Hot stamping is mostly performed in a single
color on one side of the material. The material used is
polyester in 3/8" and 5/8". The design is transferred to the
material via heat and pressure. A metal plate is produced with
the imprint information raised from the surface. Typically the
plate is held by a chase and inserted into the stamping machine.
The color to be printed is referred to as film and is held on
rolls. The printing process takes place when the metal plate is
lowered onto the material with the color film in between. Each
printing cycle results in the advancement of material and color
film.
